A sub web site of http://www.rcflier.com
This web site is hosted by Bob Hudson.
The pages on this web site document MY procedure and assembly of my Carden Edge 540I am by no means a professional or "master" builder and these procedures may not be the best methods for you.
Carden provides a nice construction guideline and color photos as an aid to building their kits.
I have chosen to build things in a little bit different order than they lay out in their manual
Part 4 - Mufflers and Header Pipes
|
|
See Side view of DA-150 with header pipes screwed on |
 |
See Front view |
 |
See Other side view |
 |
See Front view low angle looking into muffler box, see the mufflers too |
 |
See Notice one jug is further forward than the other jug |
 |
See Therefore one muffler is further ahead |
 |
See The Header pipes are the same length, 12" from exhaust port to the muffler inlet |
